Nail free installation steps 

1. Assemble the product, press the towel rack on the wall, and mark the installation position
2. Remove the patch and tear off the double-sided adhesive tape on the back of the patch.
3 Stick the patch on the marked 4 installation positions to complete the initial adhesion positioning
4. Press and hold the patch, and screw the rubber particles on the patch until the glue overflows from the holes around the patch, then the glue injection is completed.
5. After the glue injection is completed, stand still for 72 hours and wait for the glue to solidify (the product cannot be installed during this period)
6. After the glue is completely solidified, install the veneer decorative cap.
7. Tighten the screw accessories on the wall panel
8. Set the product on the wall panel
9. Tighten the fixing screws with a hexagonal wrench and install them.